Spectrophotometer Jenway 7205 - UV/Visible Diode Array Scanning – Witec AG

Art No | 720501
4'160.00 CHF
4'160.00 CHF
Brochure

Diode array technology speeds up spectral data acquisition.

Description

Covering a wavelength range of 198 to 800nm and a spectral bandwidth of 5nm, this spectrophotometer is ideal for a variety of applications in education and routine testing in clinical, veterinary, pharmaceutical and QC laboratories.

  • Simultaneous measurement of all wavelengths increases productivity, scan time as short as 3 seconds
  • Multiple measurement modes for broad application compatibility
  • Color touch screen and user-friendly interface make setup easy
  • Fast scan speed
  • English, French and German language options
  • Multiple USB ports for data storage and printer connectivity
  • Extensive range of accessories available
  • 2 year warranty

Model 7205 offers measurement modes for single wavelength with basic absorbance and % transmittance; concentration calculated using a standard or a factor; optical density; quantitation with the ability to create a calibration curve using up to 6 standards; full spectrum scanning and kinetics where up to 3 wavelengths can be measured simultaneously.

The colour touchscreen user interface provides fast and easy set up and navigation of the instrument. The 4" display allows full spectrum scans, quantitation curves and kinetics runs to be viewed easily. The touchscreen capability enables users to zoom in and out and select spectral analysis points all by simply tapping the screen.

The large sample chamber will easily accommodate the optional long path length cuvette holder and the heated 10x10mm cuvette holder which is ideal for thermostated measurements at 37°C. The sample chamber lid can also be left open during measurements which is ideal for samples in tall test tubes.

There are two USB ports for data storage and printer connectivity. The easy access USB port on the front of the instrument can be used to easily store results and quantitation curves.

 

Measurement Modes

Both models (7200 & 7205) offer measurement modes for single wavelength with basic absorbance and % transmittance. Concentration can be calculated using a known factor or by measuring a single standard. Up to 6 standards can also be measured to create a quantitation curve, with the option to measure each standard up to 3 times. Optical density can be measured at 600nm, which is ideal for cell harvesting.

Both models perform an exceptionally fast spectrum scan across the entire wavelength range in less than 6 seconds; displaying the results at 1nm resolution across the selected range. Model 7205 can measure from 198nm to 800nm and model 7200 can measure from 335nm to 800nm.

The kinetics measurement mode can be used to measure the change in absorbance over time for up to 3 wavelengths simultaneously. The concentration can also be calculated following completion of the kinetics experiment.

Diode Array Technology

Benefits of diode array technology include very fast scanning with the ability to scan the entire wavelength range of 198 to 800nm in less than 10 seconds, ideal for fast chemical reactions & denaturing materials.

Traditional spectrophotometers use stepper motors to select the required wavelength. With diode array technology each wavelength is selected by electrical scanning, which results in excellent wavelength reproducibility. Diode array optics are very reliable and require very little maintenance.

Due to the reversed optic structure utilised by the 7200, it is not affected by ambient stray light so experiments can be performed with the lid open. This is ideal for samples in tall test tubes, or where fast access is required for kinetics experiments where the prompt introduction of the reaction component is required.

USB Connectivity

There are two USB ports for data storage and printer connectivity. The easy access USB port on the front of the instrument can be used to easily store results and transfer data as CSV files to Microsoft Excel®. As well as results storage, quantitation curves can also be saved to a USB memory stick for easy and quick access, so there is no need to recreate the calibration curve each time you need to perform a measurement. The front USB port can also be used for software updates.

The USB port on the rear of instrument can be used for connection to the optional external printer for instant results. Spectrum scans and kinetics runs are printed in a vertical orientation to maximise the amount of information displayed.

Display

The colour touchscreen user interface provides fast and easy set up and navigation of the instrument. The 4” display allows full spectrum scans, quantitation curves and kinetics runs to be viewed easily. The touchscreen capability enables users to zoom in and out and select spectral analysis points all by simply tapping the screen.

Sample Chamber

The large sample chamber allows easy access for loading and unloading samples. It has been designed with a tapered base so that any accidental spillages will drain away, making it easy to clean. The sample chamber will easily accommodate the optional long path length cuvette holder and the heated 10x10mm cuvette holder. The sample chamber lid can also be left open during measurements which is ideal for samples in tall test tubes.

Cuvette Rack

There is a handy built-in cuvette rack for convenient storage of samples and blanks, which keeps the bench space tidy and clutter free.

Design

Model 7200 uses a 1024 element diode array detector with a tungsten halogen lamp, which gives good intensity over the visible region of the spectrum with low noise and drift. This is all cleverly packaged resulting in a lightweight (2.8kg) instrument with a small footprint, ideal when bench space is at a premium.

Supplier

Cole-Parmer
show all products

Specifications

Wavelength Range

198 to 800nm

Wavelength Accuracy

± 2nm

Wavelength Repeatability

± 2nm

Spectral Bandwidth

5nm

Absorbance Range

– 0.300 to 2.500A

Absorbance Accuracy

± 0.01A at 1.0A and 546nm

Absorbance Stability (A)

± 0.005A/h at 0.04A and 546nm

Noise

± 0.002A at 0.04A and ± 0.02A at 2.0A and 546nm

Stray Light at 340nm, %T

< 1%T according to ANSI/ASTM E387- 72

Concentration Range

± 2500

Concentration Calibration

Blank with a single standard or factor

Concentration Factor

± 1000

Concentration Standard

± 1000

Optical Density Factor

± 1000

Quantitation Range

± 2500

Quantitation Calibration

Blank with up to 6 standards

Curve Fit Algorithms

Linear and linear through zero

Kinetics Measurement Time

15 to 9999 seconds

Kinetics Number of wavelengths

3

Kinetics Calibration

Blank with a factor

Kinetics Display

Graphical and concentration

Kinetics Analysis

Concentration

Spectrum Range

198 to 800nm

Spectrum Analysis

Absorbance or % transmittance and up to 50 spectral analysis points

Beam Height

15mm

Light Source

Xenon lamp

Results Memory

Limited by attached USB memory stick

Outputs

USB x 2

Size (W x D x H)

212 x 422 x 120 mm

Weight

2.8kg

Warranty

2 years on the instrument, 2 years on the lamp

Related products

If you continue we assume that you consent to receive all cookies on this website. More information

My Cart